PLA 3D Printer Filament,PLA Filament 1.75mm,Dimensional Accuracy +/- 0.02 mm,1kg Spool,PLA Black

Toughness Enhanced PLA Filaments --- premium PLA filaments have the 
advantages of incredible ease of printing Optimized printing quality, high 
purity with low shrinkage and superb layer bonding, meeting your demands 
for printing projects of functional parts with higher toughness.

Dimensional Accuracy & Consistency:  These tough PLA filaments to be 
strict tolerances. Diameter 1.75mm, dimensional accuracy + / - 0.02 mm 
without any exaggeration; 1 kg spool (2.2lbs)

Clog-Free, Bubble-Free & Easy-to-use --- Complete drying for 24 hours 
before packaging and vacuum sealed with desiccants in nylon re bag. 
Recommended PLA Filament Extrusion/Nozzle Temperature 215-220℃, bed 70℃ .

Wide Compatibility --- Works and harmonizes perfectly with all common
1.75mm FDM 3D printers, thanks to the high quality standards in terms
of manufacturing accuracy and the small tolerance in diameter of +/- 0.02mm.

FAQ

Why can't the filaments stick to the hotbed easy?

1). Check the temperature setting before printing, PLA filament temperature about 190-220℃;

2). Check if the plate surface has been used for a long time, it is recommended to apply PVA glue;

3). If the first layer has poor adhesion, it is recommended to re-level the print substrate to reduce the distance between the nozzle and the surface plate;

Tips:

1).Please make 3D printer filament is to be stored in a sealed bag or box after each print to prevent moisture.

2).Be sure to insert the free end of the PLA filament into the holes to avoid being tangled for next time use.

3). If there is no print plan within a few days, retract the filament to protect the printer nozzle.